2010 Cadillac Truck Escalade RWD V8-6.0L Hybrid Page 84
Circuit/System Description
The second row power fold and tumble seats and the electronic adjustable pedals (when RPO AN3 Driver Memory Seat is not used) may only
operate while the vehicle is in Park. When the body control module detects the vehicle is NOT in park it will enable the Park Enable PCB Relay by
providing power to the relay control circuit. When the relay is enabled the electrical power feed to the adjustable pedals and second row power fold
and tumble seats is eliminated. Once the vehicle is shifted into Park the BCM will disable the Park Enable PCB Relay and the electrical power feed
to the adjustable pedals and second row power fold and tumble seats is enabled.
Conditions for Running the DTC
* The system voltage is at least 9.0 V and no more than 16.0 V.
* The DTC will only set when the output is actively being requested by the module.
Conditions for Setting the DTC
The DTC will set when the module requests the output and there is a short to ground.
Action Taken When the DTC Sets
The module output driver will be shut down and not supply voltage to the circuit.
Conditions for Clearing the DTC
* The current DTC will go to history when a malfunction is no longer present.
* The BCM clears the history DTC when a current DTC is not detected in 50 ignition cycles.
Reference Information
Schematic Reference
* Adjustable Pedal Schematics (See: Accessories and Optional Equipment/Pedal Positioning System/Diagrams/Electrical Diagrams)
* Rear Seat Schematics ()
* Upfitter Provision Schematics (See: Diagrams/Electrical Diagrams/Starting and Charging/Power and Ground Distribution/System
Diagram/Upfitter Provision Schematics)
Connector End View Reference
Component Connector End Views (See: Diagrams/Connector Views)
Description and Operation
* Adjustable Pedals Description and Operation (with Memory) (See: Accessories and Optional Equipment/Pedal Positioning
System/Description and Operation/Adjustable Pedals Description and Operation (with Memory))Adjustable Pedals Description and
Operation (w/o Memory) (See: Accessories and Optional Equipment/Pedal Positioning System/Description and Operation/Adjustable
Pedals Description and Operation (w/o Memory))
* Power Seats System Description and Operation (Front Seat) ()Power Seats System Description and Operation (Rear Folding Seat) ()
Electrical Information Reference
* Circuit Testing (See: Testing and Inspection/Component Tests and General Diagnostics/General Electrical Diagnostic Procedures/Circuit
Testing/Circuit Testing)
* Connector Repairs (See: Testing and Inspection/Component Tests and General Diagnostics/General Electrical Diagnostic
Procedures/Connector Repairs/Connector Repairs)
* Testing for Intermittent Conditions and Poor Connections (See: Testing and Inspection/Component Tests and General Diagnostics/General
Electrical Diagnostic Procedures/Circuit Testing/Testing for Intermittent Conditions and Poor Connections)
* Wiring Repairs (See: Testing and Inspection/Component Tests and General Diagnostics/General Electrical Diagnostic Procedures/Wiring
Repairs/Wiring Repairs)
Circuit/System Testing
1. Ignition OFF, disconnect the park enable PCB relay.
2. Connect a test lamp between the park enable signal circuit and battery positive voltage.
